Zoom 508 Delay Sound on Sound Device: Zoom G3n Firmware: 2.20 Name on device: Layers Optimized for: Phones/Speaker Effects chain: Patch comments: Trying to mimic an old Zoom 508 patch (A3 for those who remember). Great for creating interesting layers of sound, but it can get very messy if you aren't careful. Spoiler: Patch settings Effect: "Comp" (Dynamics), active - "yes" "Sense" = 6"Attack" = Slow"Tone" = 6"Volume" = 80 Effect: "PDL Vol" (Pedal), active - "yes" "Volume" = 100"Min" = 0"Max" = 100"Curve" = A Effect: "DIST 1" (Overdrive / Distortion), active - "no" "Gain" = 30"Tone" = 32"Volume" = 20"Comp" = MOD Effect: "Delay" (Delay), active - "yes" "Time" = 1750"F.B." = 0"Mix" = 70"Tail" = On Effect: "Delay" (Delay), active - "yes" "Time" = 4000"F.B." = 0"Mix" = 70"Tail" = On Effect: "AnalogCho" (Modulation), active - "yes" "Depth" = 52"Rate" = 54"Tone" = 77"Mix" = 82 Effect: "SpotBoost" (Overdrive / Distortion), active - "yes" "Boost" = 66"Bass" = -2"Treble" = 6"ON/OFF" = LATCH Patch Volume: 80 DSP Load: 52% Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.