jcm8 w\ some ir enjoy its heavy GFX version: 3.0 Preset name: jc8 ir heavy Optimized for: Guitar Amp Effects chain: Patch comments: jackson solist stock hum at bridge. um2 into pc out to a crate amp as my second eq and pa. id watch the bass this is bottom end murder Spoiler: Patch settings Effect: "Noise Gate" (Dynamics / Filter), active - "yes" "Detect" = Gtr In"Mode" = Manual"Depth" = 50"Threshold" = 79"Attack" = 0"Hold" = 5"Decay" = 250 Effect: "Super OD" (Overdrive / Distortion), active - "yes" "Drive" = 50"Tone" = 80"Level" = 81 Effect: "T-Scream" (Overdrive / Distortion), active - "yes" "Drive" = 18"Tone" = 50"Level" = 80 Effect: "Ms JCM800" (Amp simulators), active - "yes" "Gain" = 100"Bass" = 20"Middle" = 0"Treble" = 71"Presence" = 83"Master" = 50"Output" = 50"Level (dB)" = 0 Effect: "IR Processor" (Dynamics / Filter), active - "yes" "IR" = s-pres5"Low Cut (Hz)" = 122"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = 0 Effect: "IR Processor" (Dynamics / Filter), active - "no" "IR" = s-pres8"Low Cut (Hz)" = 123"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = 0 Effect: "IR Processor" (Dynamics / Filter), active - "yes" "IR" = HB G212 e609_01_dc"Low Cut (Hz)" = 0"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = 0 Effect: "IR Processor" (Dynamics / Filter), active - "yes" "IR" = HB G212 SM57_01_dc"Low Cut (Hz)" = 0"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = 0 Note: This is a ToneLib-GFX preset file, you will need to download and install the ToneLib-GFX software to use the preset.