Post-Rock preset

Discussion in 'ToneLib-GFX presets' started by Astral Mortem, Aug 21, 2020.

  1. Astral Mortem

    Astral Mortem New Member

    Post-Rock preset

    GFX version: 3.0

    Preset name: Post-Rock
    Optimized for: Phones/Speaker

    Effects chain:
    [​IMG]

    Patch comments:
    Preset for Post-Rock


    Effect: "Noise Gate" (Dynamics / Filter), active - "no"
    "Detect" = Gtr In
    "Mode" = Manual
    "Depth" = 50
    "Threshold" = 50
    "Attack" = 0
    "Hold" = 5
    "Decay" = 250

    Effect: "Jc Clean" (Amp simulators), active - "yes"
    "Gain" = 40
    "Bass" = 50
    "Middle" = 60
    "Treble" = 70
    "Presence" = 40
    "Master" = 90
    "Output" = 50
    "Level (dB)" = 0

    Effect: "IR Processor" (Dynamics / Filter), active - "yes"
    "IR" = GuitarHack Original Between
    "Low Cut (Hz)" = 0
    "Hi Cut (kHz)" = 20.0
    "Mix" = 100
    "Level (dB)" = 0

    Effect: "IR Processor" (Dynamics / Filter), active - "no"
    "IR" = Edge-1
    "Low Cut (Hz)" = 0
    "Hi Cut (kHz)" = 20.0
    "Mix" = 100
    "Level (dB)" = 0

    Effect: "Arena Rvb" (Reverb), active - "yes"
    "Time" = 10.0
    "PreDelay" = 40
    "LoDamp" = 20
    "HiDamp" = 34
    "Mix" = 100

    Effect: "HD Hall Rvb" (Reverb), active - "no"
    "Time" = 10.0
    "PreLPF" = 40
    "PreDelay" = 40
    "HiDamp" = 20
    "LoGain" = -9.0
    "Mix" = 100

    Effect: "TapeEcho" (Delay), active - "yes"
    "Time" = Note sync, 1/8
    "Feedback" = 40
    "Tone" = 50
    "LoDamp" = 60
    "Mix" = 75



    Note: This is a ToneLib-GFX preset file, you will need to download and install the ToneLib-GFX software to use the preset.
     

    Attached Files:

    chel, Partack, Shu and 4 others like this.